91
UDP Port to Open (5): This is the out going (Outbound) range of UDP port
numbers for this particular application.
Comment (6):
The description of this setting.
Pop. Applications:
This section lists the more popular applications that (7):
require
multiple
connections.
Select
an
application
from the Popular Applications selection and click ‘Add’ to
save the setting to ‘Current Trigger-Port Table.’
Add (8):
Add the setting to the ‘Current Trigger-Port Table.’
Reset (9):
Click ‘Reset’ will clear all above setting and you can set up again.
Current Trigger-Port All the settings for the special applications will be
(10):
listed here. If you want to remove some Special Application
settings from the " Current Trigger-Port Table", select the
Special Application settings you want to remove in the table
and then click "Delete Selected". If you want remove all
Special Appliacation settings from the table, just click
"Delete All" button. Click "Reset" will clear your current
selections.
Delete Selected (11):
Please select a special application by clicking the
‘Select’ box of the mapping, then click ‘Delete Selected’
button to remove the setting. If there’s no setting here, this
button will be grayed out.
Delete All (12):
Delete all settings existed in trigger port table.
Reset (13):
Unselect all settings.
Note: Only one LAN client can use a particular special application at a
time.
Summary of Contents for HWRN2
Page 1: ......
Page 9: ...CHAPTER IV APPENDIX 4 1 Hardware Specification 4 2 Troubleshooting 4 3 Glossary...
Page 24: ...15...
