8
Chapter II: System and Network Setup
2-1 Build network connection
Please follow the following instructions to build the network connection
between your new WIRELESS router and your computers and other
network devices:
1.
Connect your xDSL / cable modem to the WAN port of router by
Ethernet cable.
2.
Connect all your computers and network devices (network-enabled
consumer devices other than
3.
computers, like game console, or switch / hub) to the LAN port of the
router.
4.
Connect the A/C power adapter to the wall socket, and then connect it
to the ‘Power’ socket of the router.
5.
Please check all LEDs on the front panel. ‘PWR’ LED should be
steadily on, WAN and LAN LEDs should be on if the computer /
network device connected to the respective port of the router is
powered on and correctly connected. If PWR LED is not on, or any
LED you expected is not on, please recheck the cabling, or jump to
‘4-2 Troubleshooting’
for possible reasons and solutions.
Summary of Contents for HWRN2
Page 1: ......
Page 9: ...CHAPTER IV APPENDIX 4 1 Hardware Specification 4 2 Troubleshooting 4 3 Glossary...
Page 24: ...15...
