Hawking HW7ACW, User'S Manual Manual

Page: 105 / 136

98
Advanced IP address settings: This section allows you to set an IP
Address and subnet mask to fit your network if needed. Uncheck the
box to input. Otherwise, the default IP Address in AP Mode is
192.168.1.242.
Note1: It is recommended you give it an IP address in the same range
of your network. Otherwise, once it is configured it will not be in
the same range and you will not be able to access the setup page to
view the general settings.
Note2: After configuration, you can access the settings page at any
time using ‘http://repeater.setup’ from any computer that is wirelessly
or directly connected to the HW7ACW. From other devices on the
network, they must use the IP address of the HW7ACW.
(5) Select the security type that you wish to use.
The HW7ACW supports these functions: Disable (no security), WEP
or WPA pre-shared key.