Hawking HPOW5CM, User Manual

Page: 18 / 129

17
In this mode, the device can connect to other Access Points via a wireless link and be used to bridge
wired clients to the network and work as a wireless repeater for wireless devices. All Ethernet ports and
repeater access points are bridged together. Go to
section 3-3
When WISP mode is chosen, the system can be configured in Wireless repeater mode. In this mode, the
device can wirelessly connect to a WISP (wireless internet service provider), ie. Another wireless AP,
HotSpot, etc. It can then wirelessly repeat the signal and can even act as a router for these signals. NAT
is enabled and wired and wireless computers can share the same IP range. Go to
section 3-4