93
Access Point:
Choose Enable or Disable Repeater AP function, the default is Disable
ESSID:
Extended Service Set ID. When users are browsing for available wireless
networks, this is the SSID that will appear in the list..
SSID Visibility:
By default, it is “Disable”. Enable this option to stop the SSID broadcast in your
network. When disabled, people could easily obtain the SSID information with
the site survey software and get access to the network if security is not turned
on. When enabled, network security is enhanced.
Client Isolation:
By default, it is “Disable”. Select “Enable”, all clients will be isolated from each
other, which means they cannot reach each other.
Connection Limit:
Enable/Disable user limits.
User Limits:
The default value is 64. You can enter the number of wireless clients that can
associate to a particular SSID. When the number of client is set to 5, only 5
clients at most are allowed to connect to this VAP.
IAPP:
Enable/Disable for IAPP roaming. IAPP condition must use WPA-2PSK AES
security
Authentication:
Select the desired security type from the drop-down list; the options are Open,,
WPA-PSK/WPA2-PSK Personal, WPA/WPA2-Enterprise and WEP 802.1X.
Summary of Contents for HPOW5CM
Page 21: ...20...
Page 50: ...49 Settings can be modified via the VLAN setup after configuration is complete See section 4 3...
Page 126: ...125...
