background image

1-2 Safety Information

 

 
In order to keep the safety of users and your properties, please follow the 
following safety instructions: 
 
1. This range extender is designed for indoor use only; DO NOT place 
this range extender outdoors. 
 
2. DO NOT put this range extender near hot or humid places, like a 
kitchen or bathroom. Also, do not leave this range extender in the car. 
 
3. DO NOT pull any connected cable with force; disconnect it from the 
range extender first. 
 
4. If you want to place this range extender at high places or hang on the 
wall, please make sure the range extender is firmly secured. Falling from 
high places would damage the range extender and its accessories, and 
void the warranty. 
 
5. Accessories of this range extender, like the antenna and power supply, 
are dangerous to small children under 3 years old. They may put the small 
parts in their nose or mouth and it could cause serious damage to them. 
KEEP THIS RANGE EXTENDER OUT THE REACH OF CHILDREN! 
 
6. The range extender will become hot when being used for a long time 
(

This is normal and is not a malfunction).

 DO NOT put this range 

extender on paper, cloth, or other flammable materials. 
 
7. There’s no user-serviceable part inside the range extender. If you found 
that the range extender is not working properly, please contact your dealer 
of purchase and ask for help. DO NOT disassemble the range extender, or 
the warranty will be void. 
 
8. If the range extender falls into water when it’s powered, DO NOT use 
your hand to pick it up. Switch the electrical power off before you do 
anything, or contact an experienced electrical technician for help. 
 
9. If you smell something strange or even see some smoke coming out 
from the range extender or power supply, remove the power supply or 
switch the electrical power off immediately, and call dealer of purchase 
for help.

 

Summary of Contents for Hi-Gain HWREN15






























































Reviews: