WARNING
Improperly maintaining this Kart or failing to correct a problem before driving can cause a crash in
which you can be seriously hurt or killed.
Always perform a pre-drive inspection before every drive and correct any problems.
Pre-drive Inspection
Check the following items before you get on the Kart:
■ Engine Oil
Check the level and add oil if needed. Check for leaks.
■ Fuel
Check the level and add fuel if needed. Also make sure the fuel fill cap is securely fastened.
Check for leaks.
■ Tires
Use a gauge to check the air pressure. Adjust if needed. Also look for signs of damages or
excessive wear.
■ Nuts & Bolts
Check the wheels to see that the axle nuts are tight. Use a wrench to make sure all
accessible nuts; bolts, and fasteners are tight.
■ Underbody & Exhaust System
IS YOUR VEHICLE READY TO DRIVE?
Check for and remove any dirt, vegetation or other debris that could be a fire hazard or interfere
with the proper operation of the Kart
■ Air Cleaner Housing Drain Tube
Check for deposits in the drain tube. If necessary, clean the tube and check the air cleaner
housing.
■ Leaks, Loose Parts
Walk around your Kart and look for anything that appears unusual, such as a leak or loose
cable.
■ Lights
Make sure the headlight; brake light and taillight are working properly.
■ Throttle
Check the freeplay and adjust if needed. Press the throttle to make sure it moves smoothly
without sticking, and snaps back automatically when it is released.
■ Brakes
Press the brake pedal several times, check for proper brake pedal free play. Make sure
there is no brake fluid leakage.
■ Engine Stop Button
While engine is running, press and hold the Engine Stop Button for two seconds. Make
sure engine stops.
■ Steering Wheel
Check that the wheels turn properly as you turn the steering wheel.
■ Cable
Check all cable housings for wear. Check the fittings for looseness. Replace or tighten as
needed.
■ Seat Belts
Check your seat belts make sure that the locking latch works and that you can adjust them.
SAFE DRIVING PRECAUTIONS
12
