OPERATION
c. Start engine
I
nsert the key into key-switch, turn the key clockwise, and release the key when the engine
starts. The engine will warm up within 5 minutes and the engine choke will close automatically
and operate at the normal RPM (Warning: Don’t crank starter more than 5 seconds at one time).
d. Engine stop button
Important-stop button test.
Before driving this vehicle, test the Engine Stop Button to assure that it is operating properly.
With the engine running, push and hold the Engine Stop Button for two seconds for the engine
to shut down.
B. Pre-Drive Inspection
WARNING
Perform this pre-drive inspection everyday before driving vehicle. If not performed, serious damage
to the vehicle or personal injury may result.
a. Check for Engine Oil Level. Check for leaks, add oil if required.
b. Check for Fuel Level. Add fuel as necessary and do not overfill. Check for leaks.
c. Check for Brakes. Depress the rear brake pedal several times, and then check for proper
brake pedal free play. Make sure there is no brake fluid leakage. Adjust if necessary.
d. Check Tires. Check tires condition and pressure. The pressure on both Front and Rear tire is
5 and 8 lbs respectively.
e. Check Drive Chain. Check for drive chain’s condition and tension. Lubricate if necessary.
f. Check Throttle. Check for smooth operation. Assure throttle”snaps” backed to idle.
g. Check Engine Stop Button. Perform engine stop button test. Repair as necessary.
h. Check all Nuts, Bolts, and fasteners. Check wheels to see that all axle nuts and lug nuts are
tightened properly. Check and tighten as necessary all other fasteners to specified condition.
17