HAWEKA AXIS 500, Operating Instructions Manual

Page: 29 / 52

Wheel Alignment AXIS500
AXIS500 Manual Instructions
27
Front Wheel Alignment
5.10 Rim Run-Out Check
You suspected the rim has been damaged by
an accident, corrosion or any other external
influence, a rim run-out check should be carried
out when starting the measuring procedure.
In each position on the rim the laser beam of
the measuring head must indicate the same
value on the toe scales or the magnetic scales
respectively.
To check this, the measuring head is at first
attached to the rim in the normal position
(Illustration 21)
and afterwards turned by 180°
(Illustration 22)
.
During this check in the inverted position the
laser beam must point at the same scale value.
A set of adjusting adapters is available as
optional equipment for alignment of vehicles
with damaged rims as well as for Trilex and
Dayton rims.
(Illustration 21)
(Illustration 22)