Wheel Alignment AXIS500
AXIS500 Manual Instructions
21
Front Wheel Alignment
Toe Alignment:
Example: The desired toe value is zero.
•
Loosen the toe rod searing nuts.
•
Turn the toe rod until the laser point on the
right-hand side behind the front axle
indicates the halve of the difference (in this
example: 3.5 long scale lines outward).
Now the total toe is zero.
Important:
The position of the laser point on the front left-
hand side toe scale must not be changed -
adjust, if necessary! (Left front wheel at zero)
•
To check this, direct the right-hand laser to the
front toe scale. The value measured in front
must be identical with the one measured at the
rear
(3.5 scale lines outward).
•
This results in a toe value of zero
(Illustration
9)
.
•
Lock the toe rod searing nuts.
•
Then check the adjusted value
!
(Illustration 9)
Summary of Contents for AXIS 500
Page 2: ......
Page 49: ...Wheel Alignment AXIS500 AXIS500 Manual Instructions 47 Annex 13 4 Measurement report...
Page 51: ......
