- 30 -
- 31 -
EN
EN
Installation/Operation/Disassembly
06 Installation/Operation/Disassembly
Figure 6-19
Figure 6-20
Figure 6-21
Diving and surfacing
Disassembly Steps
In order to get the best dive ensure that you have pre-installed the clump weight as shown on page 27. Once
in the water when you're already having a great time, simply 'bend' your wrists into a downward motion and
let gravity do the rest. Please be sure not to exceed the diving depth of 20 meters as we cannot guarantee the
health of the device beyond this point. Surfacing is as easy as diving. Simply reverse your aim and off you go.
Please remember: the Aquajet Dive H2 is not meant to serve as a personal flotation device. It must be
continuously controlled by the user for optimal performance. Should you physically let go of the device with both
hands, the buoyancy of the Aquajet Dive H2, if left on its own, will float up to the surface. So please keep an eye
on it. Don't let it float away!!
(Optional) Remove the underwater
camera.
Press the fast-dismantle button to
remove the wings. (Figure 6-19)
Release the two lock latches on both
sides of the head cover. (Figure 6-20,
Figure 6-21)
Step 1
Step 2
Step 3
Installation/Operation/Disassembly
06 Installation/Operation/Disassembly
Figure 6-22
Figure 6-24
Figure 6-26
Figure 6-27
Figure 6-23
Figure 6-25
Unscrew the plug counterclockwise with the allen wrench.
(Figure 6-22)
(Optional) Take out the clump weight. (Figure 6-25)
Disconnect the battery cables and remove the battery. (Figure
6-26)
Use the inflator pump to inflate. After the gas nozzle is aligned
with the plug hole, hold the head cover as you press the inflator
pump to make sure the head cover only pops up slightly in the
end. After that, remove the head cover. (Figure 6-23, Figure 6-24)
Step 4
Step 5
Step 6
Step 7
NOTE:
Make sure both sides of the lock latches have been released before inflating
the pump. During the inflation process, we recommend you to press the pump gently
ensure that the head cover will not pop out of the fuselage and cause product damage or
personal injury!
NOTE:
Always work with dry hands while touching the battery and the connections to
avoid battery short circuit.