- 24 -
- 25 -
EN
EN
Performance Index
04 Main Performance Index
Maximum speed
9 km/h
Charging time
4-6 hours
Battery life
50-100 minutes
Weight
14 kg
Battery
Allen wrench
Sealing ring x2
Clump Weight
Accessorie
Inflator pump
Charger
Vaseline
Maximum power
800 W
Voltage
DC 23-29.4 V
Safe diving depth
within 20 meters
05 Accessories
Installation/Operation/Disassembly
06 Installation/Operation/Disassembly
Installation Steps
NOTE:
It is recommended that you first read through the users manual prior to the installation or
disassembly of the Aquajet Dive H2.
NOTE:
Make sure both sides of the lock latches have been released before inflating the pump. (Figure 6-6)
While you are inflating it, we recommend you to press the pump gently to ensure that the head cover
does not pop out of the fuselage and cause any product damage or personal injury!
Release the two lock latches on both sides of the head cover. (Figure 6-1,
Figure 6-2)
Unscrew the plug counterclockwise with the allen wrench (Figure 2). Release
the lock latches on both sides of the head cover. (Figure 6-3)
Use the inflator pump to inflate. Insert the gas nozzle to the pumping hole, and
hold the head cover while you are inflating it gently with the provided inflator
pump until it slightly pops up in the end, and then remove the head cover. (Figure
6-4, Figure 6-5)
Step 1
Step 2
Step 3
Figure 6-1
Figure 6-2
Figure 6-3