www.havis.com • 1-800-524-9900
16
5
Parts Included
(continued)
Docking Station
Power Cable
I/O Cover
Tablet Mounting
Points
Alignment Posts
Left Hand Tablet
I/O Cover Bracket*
Mounting Holes
(x4)
(VESA 75mm Hole Pattern)
Docking Connector
Right Hand Tablet
I/O Cover Bracket*
* - Removeable for tablet I/O access - Must be removed prior toTablet installation.
Strain Relief Point
Optional
Mounting
Holes
(x4)
(RAM D202U)
(1/4”-20 Thread)
Cable Channels
Power Cable Input
Ports
5)
Using Sealing Element sizing from Page 11, choose appropriate orientation
and apply a small amount of provided Silicone Grease to the opposite side
perimeter of the Sealing Element and insert into corresponding housing
receptacle on the Docking Station, greased end first.
Repeat for all Cable Channels.
NOTE: If no cable present, insert Sealing Elements as indicated on Page 11.
6)
Using the same Sealing Element orientation, insert a second Sealing Element
into the I/O Cover at the same Cable Channel position.
Repeat for all Cable Channels.
IP-65 Cable Installation
(continued)
Apply Grease
all around
the perimeter of
Sealing Element
