41
-
If the thermal transmitter is going to be put in the bathroom or toilet, please respect the safety
measurements described in the Fig.
6
to avoid electric risks (See
Fig.
6
).
-
Place the template on the floor(follow the instructions in the template) and mark the 4 points
existing in the template in such a way that the 4 positions get marked on the wall
(Fig.
7
).
(Keep
the template for future reference or change of place of the transmitter)
.
-
Take out the 4 cleats (diameter 8 mm) from the bag of accessories, the 4 5,5 x 38 mm screws
and the 2 6 x 40 mm screws.
-
Make the 4 bores in the 4 points made on the wall to introduce the 4 cleats of 8 mm.
-
Screw the 2 supports with the four 5,5 x 38 mm screws in such a way that the supports are in
the way as indicated in
Fig.
8
.
FIG. Nº.
7
FIG. Nº.
6
