42
-
Take the two 6 x 40 mm screws and
screw each one of them lightly on
both supports
(Point 1 Fig.
9
)
.
-
Then take the appliance in such way
that the controls panel is on the right
side. Incline the appliance with the
upper part towards you.
-
Place the transmitter on the lower
side of the wall separators
(Point 2
Fig.
10
)
.
-
Move the transmitter carefully towards the
left or right till it is centralized and fixed on
the two canals which are on its back.
-
Place the transmitter vertically and once it
is parallel to the wall, let it fall gently till the
upper separators get into both canals
(Point 3, Fig. 1
1
)
.
-
To have the transmitter perfectly fixed to
the wall, screw completely the 6 x 40 mm
screws in the upper part of the separators
(Point 1, Fig.
9
)
.
-
Make sure that the transmitter is perfectly
fixed to the wall to avoid future risks.
-
Then connect the plug to a nearby power
supply (socket).
-
You have just installed the HAVERLAND Thermal Transmitter. We
hope it satisfies your heating needs.
SCREWS
FIG. Nº.
8
FIG. Nº.
9
2
WALL
TRANSMITTER
FLOOR
3
TRANSMITTER
WALL
FIG. Nº.
10
FIG. Nº.
11
