Configuration Parameters
Parameter 0x04:
Name:
Transient Threshold
Description:
Impact detect parameter.
Do not adjust unless advised by Haven Lock.
Default:
0x06
Min:
0x02
Max:
0x12
Parameter 0x03:
Name:
Transient Debounce
Description:
Impact detect parameter.
Do not adjust unless advised by Haven Lock.
Default:
0x02
Min:
0x01
Max:
0x0A
Parameter 0x02:
Name:
Gate Operation Minimum Battery Level%
Description:
m battery level at which the gate will activate.
Default:
0x0A (10%)
Min:
0x00 (0%)
Max:
0x32 (50%)
Parameter 0x01:
Name:
Heartbeat LED interval
Description:
Heartbeat (magenta) LED flash rate in seconds.
Set to zero to disable.
Default:
0x00 (disabled)
Min:
0x00 (disabled)
Max:
0x3C (60 seconds)
Parameter 0xCD:
Name:
Lockdown Z vs. Connect Z Product
Description:
This parameter distinguishes the firmware between the Residential Haven Connect Z and the Commercial Lockdown Z.
For Lockdown, this parameter should be set to 0x02. Residential is 0x01. This parameter drives the product ID reported to Z-wave controllers
and enables/disables the capability of wired control inputs often used in commercial installations.
Default:
0x02
Lockdown ID:
0x02
Residential ID:
0x01
Notification Command Class
Notification Name
Notification Name
Manual lock operation
Manual unlock operation
RF lock operation
Power has been applied
Battery is charging
Impact detected
Value
0x01
Battery is full charged
RF unlock operation
Lock jammed
0x02
0x03
0x04
0x0B
0x0A
0x01
0x0C
0x0D
0x0E
0x0F
Type (Value)
Charge battery soon
Charge battery now
Access Control (0x06)
Home Security (0x07)
Power Management (0x08)
All notifications are sent unsolicited.
8
HAVEN
Lockdown
