9
HAVEN
Lockdown
Need help? Contact us at [email protected]
LED AND SOUNDS
3 Yellow, 1 Chirp
3 Green, 2 Chirps
Alternating Green/Red
Solid Red
Device has entered
include/exclude mode
Blue every second
Battery is charging.
Gate closed successfully
Gate opened successfully
Gate did not move to
commanded position
If Pairing button is held for 10
seconds, Red LED will light and the
lock will return to default settings.
Use caution, this also removes
it from the network.
Yellow Every 2.5 Seconds
Reset successful (after pressing
reset button)
3 Yellow, 2 Chirp (After Reset)
Unit is locked and detects an impact
3 Yellow, 1 Chirp (Security
notification)
Impact Detection
Glossary
NWI - Network Wide Inclusion
NWE - Network Wide Exclusion
S2 - Z-WAVE Security Version 2
S0 - Z-WAVE Security Version 1
DSK - Device Specific Key. This is unique to every Z-WAVE S2 device
The impact detection function uses an accelerometer that is tuned using parameters 3 and 4 set in the Configuration
Command Class. When the gate is up and transient threshold (parameter 4) is exceeded, a Home Security (0x07)
Notification, event type Impact Detected (0x0A) is sent to the Lifeline. In addition, the system sends a Door Lock Operation Report
and Access Control Notification to communicate locked status.
