USER MANUAL
6
Ensure Clearance Path
1.1
HAVEN is 0.8 inches high and should fit in the
clearance path of most modern doors.
A standard USD
nickel can be used to gauge the gap perfectly. Take a
nickel, stand it on its end and make sure that it can pass
under your door. Medium resistance against the
weather-stripping/door seal is acceptable.
If it fits, make sure the Haven device, when in the locked
position and placed against the threshold, touches at
least
.25 inches of your door to be fully secure.
If the
lock is not touching that amount of the door, you may
need to increase the height of the lock by using one or
more risers.
1
DISCLAIMER
Use of this guide at your own risk. HavenLock Inc and its parent or partner companies are not liable for any damages to property or
bodily injuries that occur during or after installation. HavenLock Inc assumes no responsibility in providing the correct tools and
accessories needed for installation unless otherwise noted. Use proper protective gear when completing the steps detailed in this
guide. This guide is simply suggestive and not in any way authoritative. Always use your own best judgment. Incorrect installation or lack
of safety precautions can lead to serious injury or death for you or anyone around the installation area. If you are not comfortable
installing HAVEN Lock, we advise you to seek out a professional skilled worker with home construction experience to assist you.
1
A. Center lock on door
B. Confirm height
Measure
A. Drill pilot holes
B. Clean surface
Drill
A. Place unit
B. Drill in screws
Secure
Installation Overview
Installation Screws (6)
Power Drill
Pencil
Phillips
Screwdriver
Measuring Tape
Phillips Drill Bit
1/8” Drill Bit
Tools Required For Install
INSTALLING YOUR HAVEN CONNECT Z
