User
Guide for HauteSHOT microNVRv1_8.docx
Page 9 of 30
2/15/2013
Alternate Headless Connection
The microNVR comes preconfigured to run Windows Remote Desktop, which is a remote desktop
application. If you want to run your system without an attached keyboard, mouse and monitor,
you can still manage the system using a standard personal computer.
1. Under Windows Start Menu, find the Windows Remote Desktop Connection item
2. Supply power to the microNVR and attach your PC to the Eth2 port with a crossover cable.
Make sure that you get a valid DHCP address from the microNVR, and then open the RDP
application. Log in with user id 192.168.168.1, with user and
password “hautespot”. This will get
you to the desktop of the system.