iii.
Connecting your DEC 1000-t to your TV through a VCR using SCART and
RF cables
Connect one end of the supplied RF Loop-through cable to the RF-out on
the DEC 1000-t (as illustrated below). Connect the other end into your
VCR's RF-in socket.
A SCART cable needs to be installed between your VCR and TV.
Then, set your TV to accept AV input (SCART input).
Tune your VCR to the output channel used by the DEC 1000-t (normally
channel 38, but this channel can be changed).
When you turn on the DEC 1000-t, you should see the Initialisation screen
on your TV set.
- 17 -