7
1.3.
RESIDUAL RISKS (to be assessed by user).
•
Overload: risk of tip-over (avoid overloading from above) or equipment damage.
•
Unsuitable terrain: risk of tip-over (refer to page giving ground pressure and wheel load values). Be careful
of thawing ground in winter.
•
Gusting winds: risk of tip-over.
•
Collision with ground or aerial obstruction: risk of impact shock or tip-over.
•
Collision with live power lines: risk of electrocution.
•
Operation on platforms, wharfs, pavements, etc.: risk of tip-over.
•
Operation in explosive atmospheres: risk of explosion.
•
Persons in machine work area (during machine travel or manoeuvres): risk of crushing.
•
Before operation, the operator must always assess ground and aerial risks.
•
Steep slopes: risk of machine runaway in high speed mode.
•
Prevent sparks or flames near batteries: risk of explosion.
1.4.
OPERATING SCOPE.
Do not use the machine:
•
With a load greater than authorised.
•
With more than four occupants in the platform, or more than two on the extension.
•
On ground unable to withstand wheel load and pressure.
•
On a sideslope or grade greater than 5° (about 9%).
•
With side force in platform greater than 40 DaN.
•
If wind speed exceeds 45 km/h.
•
In cold rooms.
•
In explosive atmospheres.
•
During storms (lightning).
•
In intense electromagnetic fields (radar, communications transmitters, high currents).
•
At night, if it is not fitted with optional floodlight.
•
On public roads.
•
Do not tow this scissor-lift platform, it is not designed for this purpose. It must be transported on a trailer.
However, in case of breakdown, the platform may be towed for short distances at low speed (see § 4.9).
Summary of Contents for H12 SD
