Haulotte H12 SD, Operating And Maintenance Instructions Manual

Page: 19 / 55

18
2.6.2. Common technical characteristics of H15SD - H15SDX.
H15SD H15SDX
Working height 15 m
Max. / min. floor height. 13 m / 1.60 m
Base overall width 2.25 m
Platform overall width 1.88 m
Platform dimensions 3.92 m x 1.80 m
Length, overall 4.12 m
Length overall with stabiliser option 4.22 m
Height, overall 2.775 m
Ground clearance 0.35 m
Wheelbase 2.74 m
Outer turning radius 4.80 m
Load capacity with single extension
700 kg (4 occupants), of which 200 kg
(2 occupants) on extension
Load capacity with double extension option
500 kg (4 occupants), of which 200 kg
(2 occupants) on each extension
Max. side force 40 daN
Max. wind speed 45 km/h
Tilt sensor with alarm buzzer at 5°
Lift and travel cut-out when tilt > 5°
Travel cut-out at floor height 8 m
Travel speed 1.1 x 5.7 km/h 1.1 x 2.9 x 5.7 km/h
Gradeability 25% 45%
Lift time 50 s
Lower time 60 s
Hydraulic tank capacity 100 l
Hydraulic pressure setting, general 240 b
Hydraulic pressure setting, travel 240 b
Hydraulic pressure setting, lift 180 b
Hydraulic pump capacity 23 + 4 cm
3
/r
Flowrate, travel and lift 52 l/m
Flowrate, steer and stabilise 9 l/m
Diesel engine, Silent Pack HATZ - type 2L 41C
- power 32.6 hp / 24 kW at 2400 rpm
- power, idling 20.4 hp / 15 kW at 1500 rpm
- consumption 238 g/kW/h - 175 g/hp/h
- consumption, idling 232 g/kW/h - 170 g/hp/h
Diesel tank capacity 65 l
Number of steer wheels 2
Number of drive wheels 2 4
Wheel step-down ratio 13.6
Differential lock yes
Hydraulic brakes yes
Freewheel enable yes
Start batteries 1x12 V - 95 A/H
Supply voltage 12 V
Solid tires – dimensions 10 x 16.5’’
Tightening torque, wheel nuts 22 daN.m
Max. force on one wheel with rated load 2800 daN
Max. pressure on concrete ground with rated load ....
Max. pressure on shale ground with rated load ....
Machine weight, with one extension 5850 kg 6000 kg
Machine weight, with double extension option 5990 kg 6140 kg
Vibration, foot level < 0.5 m/s
2
Vibration, hand level <2.5 m/s
2
Acoustic pressure level at controls ........