Haulotte H12 SD, Operating And Maintenance Instructions Manual

Page: 29 / 55

28
2
1
Photo 5
1
2
Photo 6
4.4.5.6. Safety devices.
•
Check that emergency stops are operating correctly (item 9, photos 1 and 2).
•
Check that tilt sensor is working properly (item 10, photo 1) by pushing down on one side (as the red
emergency stop button is unlocked, the buzzer should sound when limit angle is reached).
•
Check visual and audible alarms.
•
Check that the limit switches of the safety devices are not desabled.
•
Ensure that no one is in immediate vicinity of machine before lifting or lowering platform.
•
Never climb into or out of the platform using the scissors arms as means of access. Use the ladder, and lift
the safety bar to reach the platform.
•
Hold the guardrail firmly when lifting the platform or driving.
•
Never alter machine characteristics or performance scope.
•
Never use the machine in temperatures below -10°, particularly in cold rooms.
Extra checks for machines with bi-energy option:
•
check the drive batteries' charge level: only the right-hand green diode on the charge tester must be lit.
IMPORTANT.
If the machine has a 220 volt power outlet (bi-energy option),
the extension must obligatorily be connected to a mains outlet protected
by a 30 mA differential breaker.
WARNING.
These machines are not insulated and
must not be used near live power lines.