24
4.2.4. Battery discharge (bi-energy option).
If the drive battery reaches 80% discharge, the platform lift function is disabled.
For troubleshooting and rescue, see § 4.8.
4.2.5. Procedure for repair or rescue.
WARNING.
As safety devices are potentially disabled during repair or rescue operations,
they must be carried out by a competent operator.
4.3.
UNLOADING - LOADING – DRIVING.
IMPORTANT
: Before performing any function, check that the machine is in good working order, to ensure no
damage was caused during shipping. If damage is observed, make the necessary reservations to the carrier
in writing.
WARNING.
A false manoeuvre may cause the machine to tip over, resulting in very serious physical and
material accidents. Perform unloading manoeuvres on ground that is sufficiently resistant (see
ground pressure, § 2.6), flat and uncongested.
4.3.1. Unloading by lifting.
Use a 4-sling hoist.
Precautions: ensure that:
•
platform is fully stowed.
•
lifting accessories are in good working order and of sufficient capacity.
•
sling accessories can withstand 4000 kg load and are not abnormally worn.
•
sling lugs are clean and in good condition.
•
personnel performing the manoeuvres are authorised to use lifting gear.
Unloading:
•
secure four slings to four sling lugs (see drawing 12).
•
lift machine slowly, ensuring load is well distributed, then put down machine slowly.
Picture 12 : Loading secure.
WARNING.
Never stand under or too near the machine during manoeuvres.
Summary of Contents for H12 SD
