A
B
C
D
E
F
G
H
I
89
24203 3237 0
E 06 10
EN
E
- Driving
Engine-powered articulated lifts, 12 - 26 m
3 - Usage
N.B.-:-T
HE
FUNCTIONS
ARE
DESCRIBED
FOR
THE
ENTIRE
RANGE
. R
EFER
TO
THE
MACHINE
MODEL
TO
IDENTIFY
THE
FUNCTION
CONTROLS
AND
INDICATORS
.
3.1 - TEST PROCEDURE
3.1.1 - Emergency stop button operation
G r o u n d c o n t r o l b o x e m e r g e n c y s t o p b u t t o n
P l a t f o r m c o n t r o l b o x e m e r g e n c y s t o p b u t t o n
3.1.2 - Tilt sensor switch operation
1.
Pull the emergency stop push-buttons on the upper and lower control boxes (15, 46).
2.
Switch on the machine from the lower control box (72, 230). All of the ground control box
indicators light up and a sound signal (beep) is emitted.
3.
Start the machine (22).
4.
Lift the boom or jib above horizontal.
5.
Locate the tilt sensor next to the ground control box.
6.
Manually tilt and maintain the tilt sensor towards the front for a few seconds
(
Section C 2- Main components) :
• The audible beep sounds.
• For equipped machines : The slope sensor prevents lifting and driving movements.
N.B.-:-M
ACHINE
UNFOLDED
,
THE
TILT
SENSOR
GIVES
AN
AUDIBLE
SIGNAL
INDICATING
TO
THE
OPERATOR
THAT
THE
BOOM
COULD
NOT
RAISE
. I
N
THIS
CASE
,
LOWER
THE
MACHINE
COMPLETELY
,
THEN
REPOSITION
THE
MACHINE
ON
A
LEVEL
GROUND
BEFORE
PERFORMING
ANY
RAISING
OPERATIONS
.
Find all the function indicators and controls in
Section C 5 - Control boxes
Step
Action
1
Pull the emergency stop buttons( 15, 46 ).
3
Turn the key on the control box activation selector switch ( 72 ) to the right to activate the
ground control box. The indicators light up.
4
Push the emergency stop button ( 15 ). The indicators go out.
Step
Action
1
Pull the emergency stop buttons( 15, 46 ).
3
Turn the key on the control box activation selector switch ( 72 ) to the left to activate the
platform control box. The indicators light up.
4
Push the emergency stop button ( 46 ). The indicators go out.
