5 Installation
ATTENTION!
Risk of overheating.
If the maximum permissible connected
length is exceeded, the power pack will
overheat during operation.
This may result in damage to power
packs not equipped with thermal cutout
and cause a fault.
The maximum permissible
connected length must not be
exceeded.
For connected lengths for the power
7.
Connect the ionizing unit to the
high-voltage terminal.
Plug the high-voltage connector
of the ionizing unit into the high-
voltage socket of the power pack
and push at the high-voltage
cable until the stop is reached.
Screw the screw cap onto the
high-voltage socket and tighten
by hand.
NOTE:
Protect unused high-voltage
terminals against the ingress of
environmental substances using the red
blind plugs.
12
