Haug 01.7908.005, Operating Instructions Manual

Page: 10 / 24

4 Install
10
3. Place the discharging
power pack at the desired
place of use.
• The position of the
discharging power pack
has does not affect its
function.
• Make sure that the
discharging power pack
is switched off.
4. The ground socket of the
discharging power pack
must be connected to
ground potential in line with
applicable standards.
• Grounding cables of at
least 1.5 mm
2
must be
used.
5. Connect the discharging
power pack to the supply
voltage. Always use the
supplied IEC power cord
with its integrated ground
wire.
• Plug in the IEC power
cord into the cold device connection of the discharging power
pack.
• Plug in the mains plug only to a socket with functioning
ground conductor.