Hatz 2-4L30, Workshop Manual

Page: 4 / 174

3. Basic engine equipment
M 01.00 Crankshaft
M 01.10 Balancing weights 2L / 3L
M 01.20 Balancing weights, 4L
M 01.30 Cleaning crankcase,
installing injector nozzles
M 02.00 Crankshaft
M 04.00 Camshaft
M 04.10 Camshaft for valve timing
M 04.20 Camshaft for injection pump
M 04.30 Governor and injection timer
M 05.00 Conrod
M 06.00 Piston and cylinder
M 06.10 Air-cooled engines
M 06.20 Water-cooled engines
M 07.00 Cylinder head
M 07.10 Air-cooled engines
M 07.20 Cylinder head repairs
(air-cooled engines)
M 07.30 Water-cooled engines
M 07.40 Cylinder head repairs
(water-cooled engines)
M 10.00 Oil pump
M 11.00 Timing case cover
M 12.00 Starting charge
M 12.10 with injection pump
PFR 1K 80
M 12.20 with injection pump
PFR 1K 90
M 12.30 with injection pump
PFR 1K 90
from serial No. L/M31.12,
M40.16, 2L40.19, 3-4L40.18
and L/M41
M 13.00 Fan
M 14.00 Fuel injection equipment
M 14.00 Injection pump, functional test
M 14.10 with injection pump
PFR 1K 80
M 14.20 with injection pump
PFR 1K 90
M 14.30 Injector
M 14.40 Injector nozzle
M 14.50 Adjusting work with
injection pump PFR 1K 80
M 14.60 Adjusting work with injection
pump PFR 1K 90
M 17.00 Flywheel
M 20.00 Engine shutdown device,
belt tensioner
M 22.00 Air cleaner
M 31.00 Crankcase breather
M 32.00 Speed control
M 32.10 with injection pump
PFR 1K 80
M 32.20 with injection pump
PFR 1K 90
M 35.00 Enclosure
4. Tables
Tightening torques
Repair data
Fuel injection equipment and
adjusting values
Governors
Lubricating oil contents and dipstick
Key to circuit diagrams
HATZ wiring identification
Circuit diagrams
Trouble-shooting table for the
electrical system
Contents