PRESETS / POWER SAVING
Product: JH 21C06
PRESET SIGNAL TIMING TABLE:
Microprocessor-based preset functions can store 26 sets of geometry settings including the
standard settings. The following industrial standard settings have been pre-programmed by
the factory.
Preset Resolution Vert. Frequency(Hz) Horiz. Frequency(Hz) Video Mode
01: 640 x 400
70
31.47
VGA
02: 800 x 600
85
53.67
VESA
03: 1024 x 768
85
68.68
VESA
04: 1280 x 1024
85
91.15
VESA
05: 1600 x 1200
90
112.50
VESA
06: 1856 x 1392
72
102.95
Note:
- Input signals with approximately the same frequencies may be regarded as the same
signal.
- Standard settings are subject to change without notice.
POWER SAVING SYSTEM:
This monitor complies with VESA and
ENERGY STAR
©
power saving requirements. The power
saving system works only when used with VESA DPMS compliant PC’s and/or graphic controllers.
VESA DPMS
Power Saving States
MODE VIDEO H.Sync. V.Sync.
Power Power LED
ON
Active Yes Yes 130 W (typical) Lighting Green
Stand-by Blanked No Yes less than 15W Flashing quickly
Suspend Blanked Yes No less than 15W Flashing quickly
OFF Blanked No No less than 5W Flashing slowly
Note:
- When the user switch the power OFF during the monitor is in OFF mode, sometimes
the LED flashes continues a few seconds afterwards. This is not an failure.
PLUG & PLAY:
This monitor complies with VESA DDC1/2B specifications. Plug & Play is a system with computer,
peripherals (including monitors) and operating systems. It works when the monitor is connected to
DDC ready computer, which is running an operating system software that incorporates Plug & Play
functionality.
Product: JH 21C06
11