Hatteland HM 20T07 MIL, User Manual

Page: 30 / 78

30 User Controls
INB100005-8 (Rev 5)
IND100064-17
CALIBRATE RGB GAIN : Color Calibration. Press “+” to automatically adjust it.
DISPLAY ORIENTATION: (Press “+” to access the sub-menu)
Will flip/inverse the display area including PIP view. Press “+” to choose between:
Normal / Horizontal Inverse / Vertical Inverse / Inverse
LOAD (FACTORY) DEFAULTS: (Press “+” to access the sub-menu).
LOAD USER DEFAULT : Load your own personal custom settings.
SAVE USER DEFAULT : Save your own personal custom settings.
LOAD FACTORY DEFAULT : Will reset the graphic controller settings to the factory preset.
Use caution when using this function, as this will override
your current settings.
SETUP DDC : Reset/optimize image information. This function will setup
correct DDC (Display Data Channel) information. It allows
the display module to send its specifications to the display
controller. This information is used by the OSD menu.
TEST PATTERN : Shows a generic test pattern.
EXIT MENU:
Selecting this function will exit the OSD menu.
Press “+” to exit and save the current settings.
Note:
The OSD settings will also automatically be stored in memory when the OSD exit on user timeout.
OSD Menu Functions
1
4
2
3
1
4
2
3
1
4
2
3
1 2
4
2