manualshive.com logo in svg

Hatteland HM 20T07 MIL, User Manual

Share
Download
Hatteland HM 20T07 MIL User Manual Download Page 12

12

IND100077-86

INB100005-8 (Rev 5)

General

TOUCH SCREEN

This product is equipped with a Resistive Touch Screen:

Manufacturer 

: ELO TouchSystems

Touch Controller   : 2210 Serial Controller P/N 055165-000

Driver Download    : www.elotouch.com

 

 

 

 

VSD100564-2210

Warranty Label

Quality Control Label

Manufacturer:                Product:   100W    115VAC/60Hz

      Hatteland Display    20,1 Inch                230VAC/50Hz

      NORWAY                  TFT                       Date: 20070426

Serial Number:

HM 20T07 MIL-H1-1

Product labels and location

Product Labeling (examples)

Manufacturer: 

 

Product:   100W    115VAC/60Hz

      Hatteland Display  

20,1 Inch               230VAC/50Hz

      NORWAY 

 

TFT       

 

 

 

Date: 

20070426

Serial Number:

HM 20T07 MIL-H1-1

Manufacturer/Country

Product Description

Barcode (TYP+SNO)

Date of Production

Power Rating

Input Voltage

Serial Number

Warranty Label

If you are to perform service on a unit still under warranty, any warranty will be void if this label show signs of removal 

attempts (re-gluing) or removed completely. This label is located on the back of the product and covers a key screw. 

This is to aid service departments to determine if there has been any unauthorized service on a unit still under 

warranty.

Quality Control (QC) Label

This label indicates that the unit is produced, tested and packed according to manufacturer’s QA specifications.

It will include a Personal ID and signature by the personnell responsible for approving the unit in production, test and 

warehouse departments.

AA XXAXX AAA-AX-X   

NOMENCLATURE - A=Letters, X=Numbers

HM 20T07 MIL-H1-1   

Example

|| ||||| ||| || |

|| ||||| ||| || ¤------ Serial Number

|| ||||| ||| ¤¤-------- Hardware Sub Version (AC=x1 / DC=x2 / Cx=Touch / Ex=ECDIS)

|| ||||| ¤¤¤----------- Abbreviation for Military (MIL) or reserved customer ID

|| ||||¤--------------- TFT Panel Generation Version ID

|| |||¤---------------- PCB Electronics Version ID

|| ¤¤¤----------------- TFT Panel Size in inches

¤¤--------------------- HATTELAND® Product ID

Example label only

Touchscreen Label

TOUCH SCREEN

This product is equipped with a Resistive Touch Screen:

Manufacturer 

: ELO TouchSystems

Touch Controller  

: 2210 Serial Controller P/N 055165-000

Driver Download    : www.elotouch.com

 

 

VSD100564-2210

Note: Please use the provided Driver CD

delivered with the product or contact 

Hatteland Display for support.

Summary of Contents for HM 20T07 MIL















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands