Hatteland HM 20T07 MIL, User Manual

Page: 16 / 78

16
IND100078-23
INB100005-8 (Rev 5)
General Installation Recommendations
Installation
Cables
Use only high quality shielded signal cables. The signal cable should generally be kept as short as possible to provide
a high quality output on the display. The maximum cable length will depend on the signal resolution and frequency,
but also on the quality of the signal output from the computer. Recommended is 60Hz vertical frequency.
Cables up to 10 meters generally provides good picture quality even with a 1600x1200 (UXGA) 60Hz signal. In most
cases (especially with lower resolutions) even longer cables will provide a satisfactory result. This should however be
tested in advance before making the decision on how far the unit can be placed from the signal source.
Cable Entries & Connectors (Marked area) - Illustration only
Bottom View
Back View