Hatteland HD 12T21 MMC Series, User Manual

Page: 6 / 112

6
IND100131-25
Contents of package
Item Description Illustration
FS-CABLE EU
1 pcs of power cable European Type F “Schuko” to IEC.
Length 1.8m
EUR TYPE F
IEC
80099
1 pcs of power cable US Type B plug to IEC.
Length 1.8m
US TYPE B
IEC
MEDIA STD01
Documentation and Driver DVD for factory installed components like mainboard, IDE, network
etc. It also includes the Touch Screen driver for units delivered with a factory mounted touch
screen. For most recent drivers, please visit “www.hatteland-display.com/archive”.
Note: To use this DVD disc you will need an external USB CD/DVD drive or provide means of
getting contents copied over via USB memory stick/network to MMC unit. In some cases (due
to revisions) a provisonal CD (PRO02-xxx) may be delivered with the unit instead.
Menu browser for
Microsoft®
Windows®
Operating Systems
Recovery Image
(located on hidden partition on SSD)
Note: Only applicable for factory delivered units with SSD hardware.
Test Reports (3 x A4 papers):
1 x Display/MMC Checklist
1 x Product Declaration
1 x BurnInTest Certificate (signed)
HD CMB SX1-A1 or
HD CMB SX1-A2
Model Dependent:
4 pcs of Key Hole Mounting Brackets for Console/Panel Mounting,
Anodized Aluminium/Stainless Steel.
The bracket kit is suitable for 12, 15, 17 and 19 inch units and is EN60945 Tested.
Note: Either -A1 or -A2 version may be delivered during Q4-2014 to Q3-2015
Reference: http://www.hatteland-display.com/mails/02_2015_ecn.html
A1: Suitable for panel thickness 3.0 [0.12] to max: 12.00 [0.47] mm [inch]
A2: Suitable for panel thickness 1.0 [0.04] to max: 12.75 [0.50] mm [inch]
HD CMB SX1-B1 or
HD CMB SX1-C1
Model dependent:
Bracket Kit suitable for console/panel mounting which contains:
3 x Mounting Bracket for top, left and right side
1 x Mounting Bracket for bottom side (terminal/connector plate area)
8 x M5x16 screws
8 x C-Washers
HD CMB SX1-B1 = Suitable only for 24 inch units and is EN60945 Tested.
HD CMB SX1-C1 = Suitable only for 26 inch units and is EN60945 Tested.
Terminal Block Connector Kit
Terminal Block Connector Kit as follows (may in some cases be already factory mounted):
1 x 2-pin Terminal Block 5.08 (Phoenix 1961986) for DC Power In
Refer to “Configuring Housing / Terminal Block Connector” section for usage.
Note: Entries listed below are for Standard factory shipments. Customized factory shipments may deviate from this list.
Item Description Illustration
Terminal Block Connector Kit
Depending on factory mounted options, Terminal Bracket Connector kit as follows:
4 x 5-pin Terminal Block 3.81 for RS-422 / RS-485 NMEA COM (PCA100293-1)
4 x 4-pin Terminal Block 3.81 for CAN Interface (ZIA0001310-B)
4 x 4-pin Terminal Block 3.81 Digital Input/Output (PCA100297-1)
Note: Location of module(s) may
differ between unit sizes
For High Bright / Sunlight Readable models (17-24 inch) an EPDM sealing gasket for IP66
console mount is factory pre-mounted / included with delivery.
Details / Type number reference:
Surface: RAL9011, Glue: 3M9471LE, Thickness 2mm.
P007130-1 (17), P007131-1 (19), P007032-1 (24)
Package may also include: (based on accessories/options ordered)
Released