background image

Copyright © 2017 Hatteland Display AS

Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway.

All rights are reserved by Hatteland Display AS. This information may not, in whole or in part, be

copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-

readable form without the prior written consent of Hatteland Display AS. Review also:

 www.hatteland-display.com/pdf/misc/doc100703-1_permission_to_create_user_manuals.pdf

The products described, or referenced, herein are copyrighted to the respective owners. 

The products may not be copied or duplicated in any way. This documentation contains proprietary

information that is not to be disclosed to persons outside the user’s company without prior written consent 

of Hatteland Display AS.

The copyright notice appearing above is included to provide statutory protection in the event of 

unauthorized or unintentional public disclosure.

All other product names or trademarks are properties of their respective owners !

WARNING: This is a class A product. In a domestic environment this product may cause radio interference

in which case the user may be required to take adequate measures.

Last revised 6 Jan 2015

Released

Summary of Contents for HD 12T21 MMC Series

















































































































Reviews: