background image

47

IND100129-129

All specifications are subject to change without prior notice!

Specifications - HD 19T21 MxC-xxx-xxxx

SPECIFICATIONS

Note: All specifi cations are subject to change without prior notice!

Please visit www.hatteland-display.com for the latest electronic version.

2/2

• W:429.00 [16.89''] x H:382.00 [15.04''] x D:80.90 [3.19''] mm [inch]

• 4 x M6 VESA mounting 280x150mm, Max 12mm deep

• Weight: 8.6 kg / 18.9 lbs

• LED Backlight Technology, TFT Active-matrix

• 19.0 inch viewable image size, Aspect Ratio 5:4

• MVA (Multi-domain Vertical Alignment) LCD Technology

• Native Resolution

: 1280 x 1024

• Pixel Pitch (RGB)

: 0.294 (H) x 0.294 (V) mm

• Response Time

: 20ms (typical), “black” to “white”

• Contrast Ratio

: 1500:1 (typical)

• Light Intensity

: 350 cd/m² (typical)

• Viewable Angle

: +/- 85 deg. (typical) (Up/Down/Left/Right)

• Active Display Area

: 376.32 (H) x 301.056 (V) mm

• Max Colors

: 16.7 million

Multi-power Supply:

• 115&230VAC - 50/60Hz + 24 VDC 

- HD 19T21 MxC-Mxx-xxxx

• 12-24VDC 

 

 

- HD 19T21 MxC-Fxx-xxxx

Note: You may connect either AC power or DC power or both. In case both sources 

are connected, power will be sourced from the AC input. If AC input is lost, there will 

be a uninterrupted switch-over to DC input.

Power Consumption:

• Operating AC/DC: 125W (max) - 49W (typ)*

*Max backlight, Idle CPU load, Microsoft® Windows® 7)

A P P R O V A L S    &   C E R T I F I C A T E S

Physical Considerations:

TFT Technology:

TFT Characteristics:

Power Specifications:

This product have been tested / type approved by the following classification societies:

IEC 60945 4th

 (EN 60945:2002)   

IACS E10

  

IP66

 

 

 

ClassNK

 - Nippon Kaiji Kyokai 

 

GL

 - Germanischer Lloyd

DNV 

- Det Norske Veritas 

 

ABS

 - American Bureau of Shipping 

CCS

 - China Classification Society  

BV

 - Bureau Veritas

LRS 

- Lloyd’s Register of Shipping  

EU RO MR

 - Mutual Recognition

• Operating

: Temperature -15 deg. C to +55 deg. C

  Humidity up to 95%

• Storage

: Temperature -20 deg. C to +60 deg. C

  Humidity up to 95%

• IP-Rating

: Protection: IP66 front - IP22 rear (EN60529)

• Compass Safe Distance : Standard: 70cm - Steering: 45cm

Lifetime Considerations:

Even although the test conditions for bridge units provide for a maximum

operating temperature of 55°C, continuous operation of all electronic

components should, if possible, take place at ambient temperatures of only

25°C. This is a necessary prerequisite for long life and low service costs.

Environmental Considerations:

Computer Specifications:

• OS Options

: None or see table below

• Storage Options

: None or see table below

• CPU/Processor

: See table below

• Memory Options

: None or see table below

• System Chipset

: Intel® BD82QM57

• Graphics Chipset

: Intel® Arrandale IGD supports DVMT 5.0

• Ethernet LAN #1

: Intel® 82577LM Gigabit LAN 10/100/1000Mbps

• Ethernet LAN #2

: Realtek RTL8111C Gigabit LAN 10/100/1000Mbps

• Audio Chipset

: Realtek ALC892

• BIOS

: UEFI AMIBIOS

• Speaker / Buzzer

: No Speaker / 3500Hz Buzzer

• Watchdog Timer

: 256 Segments, 0, 1, 2...255 sec/min

• Power Manager

: ACPI S3/S4

• Monitoring

: Temperature and voltages status

• Other Features

: GPIO, LAN Wakeup, USB Boot and Wakeup

• DVI-I OUT Res.

: From 640 x 480 to 1920 x 1200 @ 60 Hz

• RGB OUT Resolution : From 640 x 480 to 2048 x 1536 @ 75 Hz
• Sync. Range

: Hor: 31.5 kHz to 91.1 kHz, Ver: 60 Hz* to 85 Hz

Behind front bezel - Glass Display Control™ (GDC) IP66:

• Power On/Off, Brightness Control (-/+)

• Power LED, HDD/SSD LED, Mode Status Indicator (ECDIS, Service)

• Buzzer (through glass), Light Sensor (behind glass)

User Controls:

Connector

Rear

• Ethernet GBLan

2 x RJ-45

• Keyboard

1 x PS/2 (purple)

• Mouse

1 x PS/2 (green)

• COM RS-232

1 x DB9M non-isolated

• COM RS-422/485 1 x DB9M non-isolated
• USB1.1 (<10m)

1 x USB Type A

• USB2.0 (<5m)

3 x USB Type A

• DVI or RGB OUT 1 x 29P DVI-I or as RGB with adapter
• RGB OUT

1 x 15p HD D-SUB

• AC Power IN

1 x Std IEC inlet

• DC Power IN

1 x 2-pin Terminal Block 5.08

• Line OUT

1 x 3.5mm mini jack (Lime) 

• Mic IN

1 x 3.5mm mini jack (Pink)

Input/Output Connectors:

• Projected Capacitive Touch Screen (Multitouch, USB interface)

• Optical Bonding Technology

• Sunlight Readable / High Bright (includes Optical Bonding) model

• Color Calibrated models (ECDIS)

• Variations of SSD/HDD Storage, RAM Memory, Operating System

• 1 x PCA100293-1 (4xCOM RS-422/485 isolated NMEA 2 channel)*

• 1 x ZIA0001310-B (1 x CAN isolated, 2 channel)*

• 1 x HT 00235 OPT-A1 (2W Amplified Audio out via DB9F)

• 1 x PCA100297-1 (Isolated Digital IO module,4 x Output/4 x Input)*

• 1 x PCA100294-1 (4xCOM RS-232 unisolated DB9M)*

• 1 x PCA100298-1 (LAN 10/100Mbps, 2 ports (RJ45)*

*Only 1 module can be installed

Factory Options:

• HD CMB SX1-A2

: 1 x Console Mount Kit (1-12.75mm). EN60945 Tested

• HD CMB SX1-A3

: 1 x Console Mount Kit (1-12.75mm). EN60945 Tested

  Long screws for easier installation in tight spaces.

• HD TMB SX1-B1

: 1 x Table Mount Bracket. EN60945 Tested

 Note: Can not be combined with HDD, use SSD only.

• HD VED SX1-A1

: 1 x VESA Bracket, not EN60945 Tested

• JH 19TAP STD-C1 : 1 x Frame Adapter (19" Series 1 to Series X) retrofit

• HD 19TAP SX1-C2 : 1 x Frame Adapter (19" Series X to Series 2) retrofit

• HD 19COV SX1-A1 : 1 x UV Sun Cover

• JH C01MF A-A

: 1 x USB Cable 1m, TypeA-Chassis mount receptacle

• HT 00262 OPT-A1 : 4 x RS-422/RS-485 isolated, USB ext. module)

• HT 00263 OPT-A1 : 4 x RS-232 COM non-isolated, USB ext. module

• HT 00264 OPT-A1 : 1 x CAN isolated, 2 channel, USB ext. module

• HT 00273 OPT-A1 : 4 x Digital IN/OUT isolated, USB ext. module

• HT 00274 OPT-A1 : 2 x LAN 10/100Mbps, RJ45, USB ext. module

• HT 00300 MSOS

: OS options -> 

http://www.hatteland-display.com/os

Please see user manual/datasheet for more information

Available Accessories:

Type

Description

Size/Speci

 cation

CPU 

1 x Intel® Celeron® P4505, 1.86GHz, 2MB Cache, FSB 800MHz

or 1 x Intel® Core™ i7-620LE, 2.0GHz, 4MB Cache, FSB 1066MHz

or 1 x Intel® Core™ i5-520E, 2.40GHz, FSB 800/1066MHz, 3MB Cache

Memory 1 x Single Channel, 204-pin

DDR3 1066/800Mhz

- 2GB, 4GB (Max)

Storage 2 x 2.5” SSD SATA, Multi Level (MLC) - 80GB, 120GB, 300GB
Storage 2 x 2.5" HDD* SATA

*Combination buzzer and spinning 

hard disk (HDD) is not possible.

- 1TB

Storage 2 x 2.5'' HDD SATA

Ruggedized/Automotive

- 320GB

OS 

Option

Embedded Enterprise (WEE): 

- Microsoft® Windows® Server 2003/2008/2008R2 (Eng)

- Microsoft® Windows® 7 Professional/Ultimate (Eng, SP1)

openSUSE® 11.4 (Linux)

Fedora™ 15 (Linux)

Ubuntu® 10.04 LTS

Ubuntu® 12.04 LTS

See also Accessories (HT 00300 MSOS) options.

Notes

- For Win7 OS, >1GB RAM + Review "SSD Selection Guide" in manual.

- 32bit or 64bit versions available where applicable.

Available Computer Configurations:

Released

Summary of Contents for HD 12T21 MMC Series

















































































































Reviews: