HATO 535Y, Operating Manual

Page: 3 / 27

keep them for future reference.
In accordance with the provisions of the Machinery Directive 2006/42 / WE , it is declared
that the product may not be put into operation until the final machine, into which it is built or a
subassembly of which it is built, obtains a declaration of compliance with the directives and
relevant regulations, which the final machine must meet.
RECOMMENDATIONS AND PRECAUTIONS
Before installing and using the drive, carefully read all warnings and safety rules. Incorrect
installation and non-compliance with the standards contained in the manual may result in serious
accidents.

All installation work should be carried out in accordance with applicable regulations and
standards.

The driver installation may only be performed by qualified and authorized personnel.

Installation should be carried out with basic ESD protection.

Be especially careful during assembly! The controller uses 230Vac voltage (life and health
threatening).

All works related to the proper functioning of the device (connection, start-up, operation)
must be carried out in accordance with the applicable regulations in the field of electrical
equipment operation and in accordance with health and safety regulations.

Do not connect the drive to the power supply earlier than specified in the manual, failure
to do so may result in electric shock.

Before starting the installation, check the mechanical condition of the barrier: it should not
sway excessively, it should move easily and smoothly.

Before installation, remove unnecessary items and secure accessories, such as locks.

During assembly, children, handicapped persons and motor vehicles must not be in the
vicinity of the barrier.

All fixed control elements should be located near the barrier, but away from moving parts
and out of the reach of outsiders.
 Before repairing or removing any parts of the barrier, disconnect power.

Children and people with intellectual disabilities cannot control the barrier on their own.

Configuration of overload and thrust settings may only be performed by qualified
personnel.

Fluorescent lamps must not be used as traffic lights.
AUTOMATIC BARRIER IS NOT
INTENDED FOR PEDESTRIAN TRAFFIC
This product may only be used for its intended purpose. Improper use is improper and
dangerous. The manufacturer of the product is not liable for any damage caused by improper or
negligent use.