background image

which material, construction or production defects are found, and therefore malfunctioning, will be repaired

or replaced with a defect-free device. The replaced parts become the property of the seller after servicing.
The condition for the use of this warranty is:

2.1. Presentation of the correction of the completed warranty card (seller's stamp, serial number of the

device, date of sale, sales document number, buyer's data, date and place of installation, buyer's signature)
2.2. Description of the product defect and a written complaint notification to the seller

2.3. Attaching a valid purchase document (applies to products to which the warranty card is not attached)

3.

The warranty does not cover:

a) mechanical, thermal, chemical and any other damage caused by the user's actions or omissions or external
force (e.g. atmospheric phenomena, surges or electrical disturbances, electromagnetic disturbances)

b) damage caused by:

- improper installation (inconsistent with the installation manual) and non-compliant use
- intended use or the instruction manual, design changes and modifications made by the user and

third parties
- using malfunctioning or damaged products
- using non-original spare parts or accessories other than HATO

- too much work

c) damage to devices previously dismantled or repaired by unauthorized persons

d) devices with a damaged, illegible, incorrectly filled in warranty card or a broken seal
e) damage to devices used intensively and not subject to the required periodic inspection by the installer or
other authorized company (the fact of the inspection and the scope of the maintenance activities carried out

must be recorded in the warranty card)
f) replacement of parts with a specified  lifetime that are subject to wear and tear during normal use:
batteries, accumulators, bulbs, fuses
g) maintenance
h) devices where the serial number has been removed, damaged or changed

4.

In the event of 4 unsuccessful warranty repairs, generally considered essential, the buyer has the right to
replace the goods with a new one, free from defects. If you purchase several devices in one set, the possibility
of replacement applies only to the device, the repairs of which have been unsuccessful four times.

5.

The buyer is obliged to notify the seller about the defect within 2 days from the date of its disclosure

6.

This warranty covers only HATO products installed and used in Poland

7.

An unfinished and / or non-stamped warranty card is invalid

8.

The warranty does not cover the costs of disassembly, reassembly and commissioning of the product as well
as transport to the HATO service.

9.

NOTE! The guarantee becomes void if the machine is installed by unauthorized persons.

Summary of Contents for 535Y




























Reviews: