Form No. FWMM-1021
11
English
Symptom
Probable Cause
Corrective Action
Unit turned “On”, but no heat.
Unit in standby mode.
Press the
button to turn on the waffle maker. The light
on the button will be green.
Heating element(s) defective.
Contact Authorized Service Agent or Hatco for assistance.
Temperature controller defective.
Unit not hot enough.
Setpoint temperature too low.
Increase the setpoint temperature.
Heating element(s) defective.
Contact Authorized Service Agent or Hatco for assistance.
Unit not working at all.
Unit not turned on.
Review “Operating the Unit” in the OPERATION section of
this manual.
Unit not plugged in.
Plug unit into proper power supply.
Circuit breaker tripped.
Reset circuit breaker. If circuit breaker continues to trip,
contact an Authorized Service Agent or Hatco for assistance.
Temperature controller defective.
Contact Authorized Service Agent or Hatco for assistance.
TROUBLESHOOTING GUIDE
WARNING
This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock or burn.
WARNING
ELECTRIC SHOCK HAZARD: Turn OFF power switch,
unplug power cord, and allow unit to cool before
performing any cleaning, adjustments, or maintenance.
Troubleshooting Questions?
If you continue to have problems resolving an issue, please contact the nearest Authorized Hatco Service Agency or Hatco for
assistance. To locate the nearest Service Agency, log onto the Hatco website at
www.hatcocorp.com,
select the
Support
pull-
down menu, and click on “Find A Service Agent”; or contact the
Hatco Parts and Service Team
at:
Telephone: 800-558-0607 or 414-671-6350
e-mail: [email protected]
