Doc -030 Hatch comfort C1 User manual
Revised on 15/06/2021
Light
Fixation hook
cover For cover
Reflector
Lamp
socket
Lamp cap
8.10.7
Replacement of lamp (bulb)
▶
When replacing the halogen lamp, always use genuine parts.
NOTE
Specifications of the halogen lamp : AC 12V, 50W. socket type ( E11 )
NOTE
Oil from fingers may shorten the lamp lifespan.
Hold the lamp with a plastic bag and replace. If the lamp is touched with bare
hands, wipe the lamp surface with soft fabric soaked in isopropyl alcohol or
ethyl alcohol.
WARNING
When the operating light is in use, all other parts, except handles, may be hot
and may cause burns if touched.
▶
In order to prevent any accident, assemble a reflector protection cover before
turning on the operating light.
▶
How to replace the halogen lamp
1)
Turn off the main switch.
2)
Let the lamp cool down completely.
3)
After loosening the cover fixation screw,
take off the light cover.
4)
Disassemble the lamp cap by turning it
counterclockwise.
5)
Take off the blown lamp by turning it
counterclockwise.
Cover fixation screw
Lamp
6)
Insert a new lamp into the socket by turning it clockwise while covering
it with a plastic bag.
7)
Assemble parts in the reverse order and check whether the operating light
operates properly.
NOTE
When replacing the lamp, insert a new lamp into the socket. Adjust the
direction of the lamp by turning the filament adjustment knob before
assembling the lamp cap.
▶
By default, the filament direction is vertical.
