6
USAGE RECOMMENDATIONS
1.
2.
3.
4.
5.
The fan should not be placed or installed in areas that are of extreme temperatures or near stoves, or in areas that are wet
with high humidity, or has hydrocarbon vapors such as petroleum.
Do not spray all types of spray into the fan; for example, hairspray or cleaning spray.
Do not insert fingers, pencils or other objects into the grille while the blades are spinning as it may result in possible injury
or physical damage.
If an electrical component such as supply cord, motor, or switch is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard. It is not advisable to fix the fan at home.
The air cooler must always be placed vertically; it must never be lying horizontally or placed upside down. If the air cooler
falls down, unplug it immediately and lift the fan up to a vertical standing position. Use a cloth to wipe the air cooler and
leave it to dry in order to prevent electrocution.
1.
2.
3.
4.
Use a damp cloth to wipe stains, and then dry the area by wiping.
When cleaning the fan, be careful not to let the wire, switch, motor and other electrical components get wet.
Do not use chemical products, thinner solvents, alcohol, kerosene or petrol to clean the fan.
The water tank, pre-filter, and water tank can be cleaned with water or soapy water. It should be cleaned at least every 1-2 months.
CARE AND CLEANING INSTRUCTIONS
Open the battery cover by using your fingernail to push the catch downwards as
shown by the arrow and remove the battery cover. Replace the used batteries with
new “AAA” batteries, ensuring that the positive (+) and negative (-) poles are correctly
inserted and correspond with the symbols on the remote control. Place the battery
cover back in its original position.
*Batteries should be removed from the remote control when not in use for a long
period of time.
Signal Emitter
Lock
HOW TO REPLACE THE REMOTE CONTROL BATTERY
