4. Fit the front shelves
Parts
2 x Front shelf
4 x 20mm M5 bolt and nut
The front shelves are the angle
aluminium with a black pipe attached
via pipe clips.
The
bottom
shelf is the one with the
open ended pipe on the right.
The
top
shelf is the one with the end
stop (closed pipe) on the right.
The twin water valves will fit on the
bottom right hand side in the next
step.
Fit to the brackets in the same way as
you fitted the rear shelves, and do the
nuts up tightly.
5. Fit water valves
Parts
1 x twin water valves
See photos at www.harvst.co.uk/setup
Fit the water valves to the right end of
the pipe on the bottom front shelf. The
snap-on hose connector faces
backwards
towards the rear of the
greenhouse, so that the
bottom
outlet
plugs into the front shelf pipe. Secure
the valve to the pipe with a jubilee clip.
In the drawing you can also see a green
pipe going upwards, you will fit this
later (it’s black in real life).
