8. Fit front cross bar and doors
First, drop the crossbar into the brackets
on the front of the end panels.
The bracket for the lid opener faces
backwards, inside the unit.
Then put the doors in; you'll need to lift
the cross bar slightly.
The
left
hand door goes on the
rearmost
track. The
right
hand door
(with both handles fitted the same way)
goes in the
front
track:
Parts
1 x Crossbar : 25mm box
section with twin black
plastic track
2 x M5 40mm bolt and nuts
2 x Door panel
1 x Door handle
2 x M5 16mm bolt and nuts
On the left hand door, you’ll see two
holes for mounting the small handle.
Bolt the handle to the door using two
M5 * 16mm bolts, with a washer and
nut on the inside of the door.
The right hand door doesn’t have a
small handle; you can use the long
handle attached to the side of the
door.
The right hand door has a sticker on
the top right.
Bolt the crossbar in place using the
40mm bolts and nuts.
