Optional Accesories Assembly
30
30
Overhead Guard Swing
Overhead guard with Dado Blade fitted
17
16
15
19
Square bolt F
Square bolt E
The overhead guard can be swung out of way for making
adjustments to the blade. The swinging action can be altered
by adjusting the cam wheel stop (H) located to the base of the
stand pole unit, see diagram 17-18.
To adjust, release the locking clamp (G) to the base of stand
pole unit, using the supplied Hex key rotate the cam wheel
stop. Swing the arm assembly until the cam wheel is up against
the stop, make further adjustment if required and tighten the
clamp (G) when finished, diagram 17-18-19-20.
18
G
H
Stop
Cam wheel
Swing
Rear view
IMPORTANT! IF YOU INTEND TO USE A
DADO BLADE MAKE SURE YOU REMOVE
THE RIVING KNIFE.
Summary of Contents for Axminster AT254LTS
