Optional Accesories Assembly
28
28
6
9
7
8
5
5. Install the stand pole unit to the support arm by four
M10x40mm Hex screws and tighten securely, see diagram 5.
8. Line up the threaded square bolt (A) with the mounting
flange on the guard unit and secure it to the arm. Fit a retaining
clip over the flexible soft pipe and secure it in place onto the
overhead guard assembly outlet (B), see diagram 8-9.
6. Release the bracket Hex bolts on the stand pole and slide the
arm unit through the stand pole bracket assembly. Nip-up the
Hex bolts, see diagram 6-7.
7. Fit the dust port and gasket to the arm unit pipe. Secure in
place with the set screw M5x12, dee diagram 6.
Mounting flange
Outlet B
Square bolt A
Flexible pipe
Hex Bolts
Arm unit
Summary of Contents for Axminster AT254LTS
