4
System Requirements
The Baler Processor must have Version 3.3 or higher.
Tools Needed:
- Standard wrench set
- Side cutter
- Standard socket set
- Electric drill and bits
- Standard nut driver set
- Hammer & Center Punch
Safety
Carefully read all safety signs in this manual and on the moisture sensor kit before use. Keep signs clean and
clear of obstruction to view. Replace missing or damaged safety signs. Replacement signs are available from
your local authorized dealer. See your installation manual under the replacement parts section for the correct
part numbers.
Keep your moisture sensor kit in proper working condition. Unauthorized modifications to the moisture sensor
kit may impair the function and/or safety of the machine.
Carefully read and understand all safety signs before installing or servicing.
Safety Signs
Number 1
Disconnect power before servicing.
Part no. DCL-8003
Number 2
Read and understand the operator’s manual before
using or working around the equipment.
Part no. DCL-8000