![background image](http://html1.mh-extra.com/html/harvest-tec/agco-600a1/agco-600a1_installation-manual_2103730005.webp)
5
Installing the 600A1 Moisture Sensor Kit
Mounting the Dual Channel Processor (DCP)
Locate the Dual Channel Processor (006-6671LS
), four 5/16” x 1” hex bolts, flats, locks and nuts. Mark, and
drill four 3/8” (9.525 mm) holes following the template shown below. The whip wire extension on the DCP
should be facing down when attached to the baler. Mount the DCP cover (001-5650X) over the DCP and
secure the hardware.
A = 12” (304.80mm)
B = 3” or (76.200mm)
10.62 inches = 270mm
5.00 inches = 127mm