5
Installation of Applicator
Installation of Tank
1. Install the two saddle legs (001-6707MHD1)
on to the rear of the bale support bracket.
Locate the pre-drilled holes and hardware
from parts bag 20 to mount the legs as
shown (right). Do not fully tighten until cross
beam is installed in next step.
2. Locate the cross beam (001-6707HD2) and
mount between the two tank legs (001-
6707HD1) using the pre-drilled holes on
each leg. Using the hardware in parts bag
20 secure the beam. The tank legs can now
be fully tightened.
3. Position the tank assembly (030-9218) and tank
straps (001-6707P). *Do not tighten tank straps
prior to installing the Rear Light Camera
Bracket in the next step.
001-6707MHD1
001-6707MHD2
001-6707PMZ