20
Wiring Diagram
– 700 Series
1. Connect the power harness (006-765IC) to the tractor battery (12 volt) using the red wire with fuse to the positive
side and the black wire to the negative.
A. The power harness must be connected to the battery!
CONTACT HARVEST TEC BEFORE MODIFICATIONS.
*The unit will draw more amps than convenience outlets can handle. Any modifications of the power
harness will void systems warranty*
B. This unit will not function on positive ground tractors.
C. If the unit loses power while operating it will not keep track of accumulated pounds of product
used.
2. The power harness on the tractor (006-765IC) will run from the tractor battery to the hitch. The power harness on
the baler (006-765B2) will connect to the tractor power harness (006-765IC) at the hitch.
3. Connect the keyed power wire (006-765CPH) to a keyed power source on the tractor.
The keyed power wire must connect to a keyed source or the unit will not power up correctly.
4. Attached the ISO Communication Module (006-7671) to the tractor power harness (006-765IC).
5. Attach the End of Bale (EOB) connection on baler harness (006-765B2) to the EOB Sensor (006-7400).
6. Attach the Flowmeter (006-4724A) to ISO Pump Module connection on pump plate assembly.
7. Attach the rubber molded connector on pump plate to the Pump (007-4120DE).
8. Attach star wheel (030-4642 U/UE) connection to ISO Pump Module on pump plate assembly.
System Wiring Diagram
Hay Indicators
006-7502(E / R)
Solenoids
002-2203F
Flow Meter
006-4724A
ISO Communication Module (ICM)
030-6673
Power Harness on Tractor
006-765IC
700 ISO Pump Module
006-7671LS
Power Harness on Tractor
006-765B2
End of Bale Sensor
006-7400
Moisture Harness
006-7303EM2
Key Power Harness
006-765CPH
Optional Harvest Tec
Display Harness
006-765GH
Baler Integration Harness
006-765VA
Active Terminator from Baler
Optional
Hay Indicator Harness
006-7503H
Solenoid Harness
006-3650-S1
Star Wheels
030-4642 (U/UE)