![background image](http://html1.mh-extra.com/html/harvest-tec/600ss/600ss_operation-manual_2103722024.webp)
24
Common Questions
1. How do I turn the system on/off?
Turn the key in the tractor to the ON position. The ISOBUS Monitor will turn on, and the baler, on
600SS working screen tabs, will be viewable. Turn the system off by turning the tractor key OFF.
2. How to get in the LBS/TON, MC%, and TONS/HR menus?
In the Main Menu press the SETUP MODE key. From this screen you can change your alarm settings
and bale rate settings. See SETUP INSTRUCTIONS in the Operations Manual for a detailed
explanation of this process.
3.
The moisture content displays “LO” or “HI” all the time.
When the moisture content display does not change frequently while baling, there is likely a faulty star
wheel connection. One of the first places to check is inside the white star wheel block. Check to see if
the electronic swivel is in the star wheel shaft and check to see that the star wheel shaft is not working
out of the block. Also, check all star wheel wires and connectors to see if there is a continuity or
grounding problem.
4. Should the battery connections be removed before jump starting or charging a battery?
Yes. Anytime the tractor will have voltage going up rapidly the connections should be removed.
5. What is the moisture range of the moisture star wheels?
The star wheel sensors will read moisture levels from 7% up to 32%
6. Can dielectric grease be used when connecting harnesses?
Yes. Using dielectric grease will assist with good harness connections through the system.
7.
What do the lights on the 030-6672B indicate?
Red Light
– The Bluetooth receiver has power.
Green Light
– When the proper active connection is
selected in the Hay App menu, the green light will indicate connection with the iPad.
Summary of Contents for 600SS
Page 2: ...2 intentionally blank...
Page 30: ...30 NOTES...