![background image](http://html1.mh-extra.com/html/harvest-tec/600ss/600ss_operation-manual_2103722021.webp)
21
Wiring Diagram
A. Locate the tractor power/communication harness (006-6650TM).
B. Connect the red power wire with the 50 amp fuse to the positive side of the battery (12 volt).
a. The power harness must be connected to the battery!
The unit will draw more amps than
convenience outlets can handle
.
b. This unit will not function on positive ground tractors.
c. If the unit loses power while operating it will not keep track of accumulated pounds of
product used and bale records.
C. Connect the black ground wire to frame of tractor or negative side of battery (12 volt).
D. Connect the Bluetooth Receiver (030-6672B) to the Communication Harness (006-6650TM) in place of
E. Connect the key power orange wire to a keyed power source.
Dual Channel
Processor
(DCP)
006-6671SS
Bluetooth Receiver
030-6672B
Optional Port
Data
Transfer
Moisture/Bale
Rate Harness
006-7303HS
Proximity Sensor (2X)
006-7303S
Star Wheel
Assembly (2X)
030-4642
End of Bale Sensor
& Stroke Counter
006-7400
Power/Comm Harness on Baler
006-6650LS2
Power/Comm Harness on Tractor
006-6650TM
Connect Orange
Key Power Wires
Terminating Connector
006-5650Z
Y Splitter for EOB
& Stroke Counter
006-7400Y
Summary of Contents for 600SS
Page 2: ...2 intentionally blank...
Page 30: ...30 NOTES...